Pore-scale study of effects of different Pt loading reduction schemes on reactive transport processes in catalyst layers of proton exchange membrane fuel cells

Reducing the Platinum (Pt) loading while maintaining the performance is highly desired for promoting the commercial use of proton exchange membrane fuel cells (PEMFCs). Different methods have been adopted to fabricate catalyst layers (CLs) with low Pt loading, including utilizing lower Pt/C catalysts (MA), mixing high Pt/C catalysts with bare carbon black particles (MB), and reducing CL thickness while maintaining high Pt/C ratio (MC). In this study, self-developed pore-scale model is adopted to investigate the performance of the three Pt reduction methods. It is found that MA shows the best performance while MB shows the worst. Then, effects of Pt dispersion are further explored. The results show that denser Pt sites will result in higher local oxygen flux and thus higher local transport resistance. Therefore, MA method, which shows the better Pt dispersion, leads to improved performance. Third, CLs with quasi-realistic structures are investigated. Higher tortuosity resulting from the random pores produces higher bulk resistance along the thickness direction, while MA still exhibits the best performance. Finally, improved CL structures are investigated by designing perforated CL structures. It is found that adding perforations can significantly reduce the bulk transport resistance and can improve the CL performance. It is demonstrated that CL structure plays important roles on performance, and there are still huge potentials to further improve CL performance by increasing Pt dispersion and optimizing CL structures.     

Simulation and analysis of dual-reflux pressure swing adsorption using silica gel for blue coal gas initial separation

A dual-reflux pressure swing adsorption (DR-PSA) process was proposed and simulated to initially separate the blue coal gas, aiming to capture carbon dioxide (CO₂) and enrich hydrogen (H₂), simultaneously. With a feed flow rate of 7.290 slpm, a light product reflux flow rate of 0.505 slpm and the heavy product reflux flow rate of 3.68 slpm, the developed DR-PSA process could capture CO₂ up to 64.01% with a recovery of 99.60% and enrich H₂ up to 34.66% with a recovery of 97.63% from the blue coal gas (36.2% N₂/28.5% H₂/13.9% CO/12.7% CO₂/8.7% CH₄). In addition, in order to optimize the process, the effects of various operating parameters on the DR-PSA process performance in terms of product purity and recovery were discussed in detail, including the feed position, the light product reflux ratio and the heavy product reflux ratio. Moreover, the dynamic distribution behaviors of pressure, temperature and gas-solid concentration were presented to explain and evaluate the process separation performance in depth under different operating conditions.     

Modeling,design, and optimization of a cost‐effective and reliable hybrid renewable energy system integrated with desalination using the division algorithm

People in the Middle East are facing the problem of freshwater shortages. This problem is more intense for a remote region, which has no access to the power grid. The use of seawater desalination technology integrated with the generated energy unit by renewable energy sources could help overcome this problem. In this study, we refer a seawater reverse osmosis desalination (SWROD) plant with a capacity of 1.5 m³/h used on Larak Island, Iran. Moreover, for producing fresh water and meet the load demand of the SWROD plant, three different stand‐alone hybrid renewable energy systems (SAHRES), namely wind turbine (WT)/photovoltaic (PV)/battery bank storage (BBS), PV/BBS, and WT/BBS are modeled and investigated. The optimization problem was coded in MATLAB software. Furthermore, the optimized results were obtained by the division algorithm (DA). The DA has been developed to solve the sizing problem of three SAHRES configurations by considering the object function's constraints. These results show that this improved algorithm has been simpler, more precise, faster, and more flexible than a genetic algorithm (GA) in solving problems. Moreover, the minimum total life cycle cost (TLCC = 243 763$), with minimum loss of power supply probability (LPSP = 0%) and maximum reliability, was related to the WT/PV/BBS configuration. WT/PV/BBS is also the best configuration to use less battery as a backup unit (69 units). The batteries in this configuration have a longer life cycle (maximum average of annual battery charge level) than two other configurations (93.86%). Moreover, the optimized results have shown that utilizing the configuration of WT/PV/BBS could lead to attaining a cost‐effective and green (without environmental pollution) SAHRES, with high reliability for remote areas, with appropriate potential of wind and solar irradiance.     

Performance improvement of microbial fuel cell through artificial intelligence

The current work introduces an enhancement in the performance of the microbial fuel cell through estimating the optimal set of controlling parameters. The maximization of both power density (PD) and the percentage of chemical oxygen demand (COD) removal were considered as the enhancement in the cell's performance. Three main parameters in terms of performance as well as commercialization are the system's inputs; the Pt which takes the range of 0.1‐0.5 mg/cm², the degree of sulphonation in sulfonated‐poly‐ether‐ether‐ketone that changes in the range of 20‐80%, and the rate of aeration of cathode which varies between 10 and 150 mL/min. From the experimental dataset, two robust adaptive neuro‐fuzzy inference system models based on the fuzzy logic technique have been constructed. The comparisons between the models' outputs and the experimental data showed well‐fitting in both training and testing datasets. The mean squared errors of the PD model, for testing and whole datasets, were found 2.575 and 0.909 while for the COD model it showed 19.242 and 6.791, respectively. Then, based on the two fuzzy models, a Particle Swarm Optimization algorithm has been used to determine the best parameters that maximize both of the PD and the COD removal of the cell. The optimization process was utilized for single and multi‐object optimization processes. In the single optimization, the resulting maximums of the PD and the COD removal were found 62.844 (mW/m²) and 99.99 (%), respectively. Whereas, in the multi‐object optimization, the values of 61.787 (mW/m²) and 96.21 (%) were reached as the maximums for the PD and COD, respectively. This implies that, in both cases of optimization processes, the adopted methodology can efficiently enhance the microbial fuel cell performances than the previous work.     

Effect of obstacle density on the travel time of the visually impaired people

Because China has put more emphasis on people with disabilities, their living conditions and protection have received increasing attention. In an emergency, the visually impaired people are limited in their ability to evacuate, especially along egress paths with obstacles. This paper studied the relationship between the travel time of visually impaired people and obstacle density in their path. Eight sighted people and 32 people with visual impairments were chosen to carry out the walking experiment. The results of the experiment showed that the travel time of sighted people was shorter than that of visually impaired people under the same obstacle and non‐obstacle situations. Based on the analysis of variance of travel time, it was clear from the results that the travel time of the visually impaired people rapidly increased when there were obstacles. When the obstacle density was kept to within a certain range, there was no obvious increase in travel time. Once the density exceeded this range, there was another obvious increase. Based on this result, it can be seen that keeping the obstacle density to within a certain range could be helpful for the visually impaired people during an evacuation when the egress paths cannot be made obstacle‐free.     

Sustainable ammonia production through process synthesis and global optimization

Current ammonia production technologies have a significant carbon footprint. In this study, we present a process synthesis and global optimization framework to discover the efficient utilization of renewable resources in ammonia production. Competing technologies are incorporated in a process superstructure where biomass, wind, and solar routes are compared with the natural gas-based reference case. A deterministic global optimization-based branch-and-bound algorithm is used to solve the resulting large-scale nonconvex mixed-integer nonlinear programming problem (MINLP). Case studies for Texas, California, and Iowa are conducted to examine the effects of different feedstock prices and availabilities. Results indicate that profitability of ammonia production is highly sensitive to feedstock and electricity prices, as well as greenhouse gas (GHG) restrictions. Under strict 75% GHG reductions, biomass to ammonia route is found to be competitive with natural gas route, whereas wind and solar to ammonia routes require further improvement to compete with those two routes. © 2018 American Institute of Chemical Engineers AIChE J, 65: e16498 2019     

Modeling of compressive strength of cemented sandy soil

This paper attempted to show the application of particle swarm optimization in the prediction of the compressive strength of cement sandy soil from the curing period, porosity of sample and percentage of cement. The results of the study show that the unconfined compressive strength of the cement stabilized sandy soil increases with an increasing cement content curing time period. Moreover the compressive strength decreases with an increasing porosity. The compressive strength improvement due to cement treatment has a larger increase in samples with less porosity. In addition, particle swarm optimization algorithm is and accurate technique in estimation of compressive strength of cement stabilized sandy soil. In order to compare of existing correlations, a total number of 100 unconfined compressive tests and 15 scanning electron microscope tests have been conducted on cemented Babolsar sand. It can be concluded that compared to existing correlations models, particle swarm optimization algorithm models give more reliable prediction about compressive strength of cement satblized sandy soil. Moreover, the sensitivity analysis of the polynomial model shows that cement content and porosity have significant impact on predicting unconfined compressive strength.     

A Dynamic Memory Allocation Optimization Mechanism Based on Spark

Spark is a distributed data processing framework based on memory. Memory allocation is a focus question of Spark research. A good memory allocation scheme can effectively improve the efficiency of task execution and memory resource utilization of the Spark. Aiming at the memory allocation problem in the Spark2.x version, this paper optimizes the memory allocation strategy by analyzing the Spark memory model, the existing cache replacement algorithms and the memory allocation methods, which is on the basis of minimizing the storage area and allocating the execution area according to the demand. It mainly including two parts: cache replacement optimization and memory allocation optimization. Firstly, in the storage area, the cache replacement algorithm is optimized according to the characteristics of RDD Partition, which is combined with PCA dimension. In this section, the four features of RDD Partition are selected. When the RDD cache is replaced, only two most important features are selected by PCA dimension reduction method each time, thereby ensuring the generalization of the cache replacement strategy. Secondly, the memory allocation strategy of the execution area is optimized according to the memory requirement of Task and the memory space of storage area. In this paper, a series of experiments in Spark on Yarn mode are carried out to verify the effectiveness of the optimization algorithm and improve the cluster performance.     

一种激光眼组织切割系统设计及实验

针对医生手工进行白内障手术,病人术后视力恢复效果取决于医生手术熟练度的问题,提出了一种激光眼组织切割光路运动系统。系统采用直线电机带动平面镜运动的形式改变光路,利用聚焦透镜实现激光对样品单点切割。建立了白内障手术中碎核、撕囊扫描轨迹的数学模型,通过MATLAB仿真验证扫描轨迹数学模型的正确性。最后以透明塑料为样品模拟眼球实验,结果表明此系统可以实现给定轨迹切割,为激光眼组织切割设备研发提供了一种新方案。